.
List of products by brand DIVESOFT
.
.
Ohm-meter plug-in.
For example: bulbs check, cables check.
After connection to the He/O2 analyzer the measuring of impedance in range of 0 — 1000 ohms is automaticaly switched on.
There is an option to have an acustic signal when the impedance goes under 200 ohms.
With this product we recommend to order measuring cabels #1058.
The Divesoft quick release buckle is designated for joining two straps 50 mm (2 in) wide.
The mirror is based on one of the oldest and simplest signaling devices – sun reflection. A diver lost in the sea or on a desolate coast can using the sunlight and a mirror attract the attention of a ship or a search plane even on a several kilometer distance.
Voltmeter plug-in for example: battery check (lights, scooters...).
After connecting to the He/O2 Analyzer it automatically switches itself into measuring mode.
It measures the varying tension up to 28 V (RMS) and the constant tension up to 40 V with polarity indication.
We recommend you to order measuring cord #1058..
Simple connector to the DIN G5/8 valve. The connection is placed into the gas input port of the analyzer and pushed against the tank valve.
Gas flow is regulated using the tank valve. It is suitable for a fast analysis of gas in several tanks. With some valves is may be difficult or even impossible to set a low enough gas flow – in such case use a flow limiter or regulator.
The connection to an inflator hose enables the measuring of mixtures in already dressed tanks without the need of removing the second stage regulators.
You only need to disconect an inflator or other quick release connector, which will output a flow of 0.2 l/min at 10 bar.
The connector is cylindrical with a diameter of 5.8 mm, to the He/O2 analyzer it is connected via a connection hose.
Simple connector to the DIN G5/8 valve. The connection is placed into the gas input port of the analyzer and pushed against the tank valve.
Gas flow is regulated using the tank valve. It is suitable for a fast analysis of gas in several tanks.
With some valves is may be difficult or even impossible to set a low enough gas flow – in such case use a flow limiter or regulator.
Simple flowmeter for checking of the flowing air from a professional or standard limiter. It can also be used for calibration of a standard flow limiter.
The measuring cables for using with ohmmeter and voltmeter.
Divesoft bungee anchor providing easy and quick fixing of the bungee with two loops, used to fix the wing to the diver's body. The anchor is made of 3mm thick titanium.
The edges of the anchore do not damage the bungee, as they are all chamfered and finely sandblasted.
To empty your tanks without too many noise.
Allow you to stay close of your cylinder during purge.
The stainless ball serves as a valve of the reduction valve in the flow limiter. In a standard flow limiter, the second ball is part of the regulation valve.
There are 5 pcs in one package, price is per the whole package.