.
Category: Equipment
.
.
Canyon trouser cover in PVC 1100 dTex 650 g/m².
The waistband and thigh straps are closed with three clip buckles.
Effective for protecting the harness and the neoprene canyoning suit.
Highly resistant cover.
Robust automatic seams, as on our harnesses.
Harness tool holder
Increase your gear carrying options with the CARITOOL. A great accessory for mountaineering, ice climbing and long routes, it allows quick access and organization of ice screws, pitons, nuts... Will also allow for quick storage/holstering of ice tools. Compatible with the slots on most Petzl harnesses and also attaches to the webbing waist belts of other harnesses.
Climbing Technology
Light alloy descender for single ropes.
Main features:
ideal for use in caving;
equipped with a clicker that allows the rope to be introduced without releasing the carabiner from the harness;
allows the speed of descent to be adjusted by holding or sliding the free end of the rope;
the hole on the lower flange allows the quickdraw carabiner to be placed directly on the descender;
spare pulley available
Brake bar descender for long descents
RACK is an easy-to-use caving descender. It can be used with 9 to 13 mm diameter low stretch kernmantle ropes (on one rope strand) or with 8 to 11 mm low stretch kernmantle ropes (on two strands) to facilitate long descents over 80 meters. The brake bars are replaceable to prolong its useful lifetime.
Simple, lightweight descender for caving
SIMPLE, as its name implies, is an easy-to-use caving descender. It can be used with 8.5 to 11 mm diameter low stretch kernmantle ropes. Reduced bulk and low weight simplify progression in narrow passages. The pulleys can be rotated or replaced to prolong the duration of use over time.
Assisted braking descender for caving
Descend with assisted braking for your cave explorations! STOP is a caving descender with assisted braking that can be used with 8.5 to 11 mm diameter low stretch kernmantle ropes It provides better control over the descent and makes maneuvers on the rope easier. The ergonomic handle makes the grip and overall use especially comfortable. Stainless steel friction zones make it a durable tool for all your excursions!
Made from Warmtex the most abrasion resistant material available for neoprene knee and elbow pads.
Warmtex was developed and is only manufactured by Warmbac
The equipment holder for the CANYON CLUB harness provides additional racking options, making it easy for the guide to stow the carabiners of the DUAL CANYON CLUB lanyard. It connects to the waistbelt webbing of the harness.
Sit-harness for canyoning or caving. Fully adjustable. Two low sheathed tie-in points for good performance when ascending on rope. Waist, thigh or buttock adjustment by steel ironing buckles. Two sheathed gear loops.
Designed to meet the demands of daily supervision in the large canyons of Reunion Island, the Mazerin was created for professionals who regularly use the rope climbing technique.
As with a harness, its protective breeches provide a good, comfortable fit when suspended for long periods of time in the open air.
The movable thigh straps* that hold the subcutaneous skin in place are quick to put on and take off, and relieve the crotch of friction during approach, exit or transition steps.
Used and tested for several years in numerous expeditions, this monitor sit-harness, with its knife holder straps and its attachment specially designed for bags, has proved its effectiveness in both canyoning and caving.
* These straps are also sold as replacement parts (reference AVCA04Z)
Made from Warmtex the most abrasion resistant material available for neoprene knee and elbow pads.
Warmtex was developed and is only manufactured by Warmbac
Mobile sheathed equipment carrier that can be threaded onto any strap up to 45 mm wide. It has the advantage of sliding to be positioned in the right place. It will become the ideal complement to the fixed equipment holders of your equipment.
The protective seat is designed for CANYON CLUB and CANYON GUIDE harnesses. It is durable and interchangeable, and effectively protects the wetsuit and harness webbing from abrasion. Available in three colors, in order to personalize the equipment and easily differentiate groups.
Twin pulley with fixes side plates that allows easy maneuvering on ropes or cables.
Pulley for SIMPLE caving descender
The replacement pulley prolongs the lifespan of the SIMPLE descender. It is compatible with the upper and lower pulleys of the SIMPLE (D004AA00) descender, and only with the lower pulley of the SIMPLE (D04) descender.
Double pulley for travel along ropes
The TANDEM is designed for smooth and efficient Tyrolean traverses on rope.
Efficient double pulley for travel along ropes
The TANDEM SPEED is the fastest of the carriage pulleys. It is specifically designed for lower-angle Tyroleans.