Excellent tool for regulator adjusting.

In one step you can adjust medium pressure from 1.stage and fine adjust 2.stage. 

All this with only one regulator hose connection.

Compatible with Apeks regulators and other compatible types (Aqualung, Scubatech e.g.)

This precision made tool is designed to split the first stage of a regulator and is adjustable between 35 mm and 50 mm to fit a variety of models.  

Tool to remove easily the cover of your regulator 2nd stage

Key set in box :

• Halen : 1,5 / 2 / 2,5 / 3 /4 / 5 / 6 / 8 / 10
• Torx : T10 / T15 / T20 / T25 / T27 / T30 / T40 / T45 / T50

Halen long keys set : 1,5 / 2 / 2,5 / 3 /4 / 5 / 6 / 8 / 10
On support

Handle bar 1st Stage

Allow to maintain 1st stage in the bench vise during servicing

Intox o-ring spatule, to remove o-rings without damage.

Vertical and horizontal flat sides, 2,5mm 

Intox o-ring spatule, to remove o-rings without damage, flat sides, 1,2mm

Scuba multi tool, very small 8,5mm x 5,3mm with 15 functions to solve issue in any circumstances, even under water!

Scuba multi tool, very small 8,5mm x 5,3mm with 15 functions to solve issue in any circumstances, even under water!

Schrader valve screwdriver.

Screwdriver for tank valve

Handle bar 1st Stage

Allow to maintain 1st stage in the bench vise during servicing

Velcro with one side male and one side female, to attach / detach easily your material.

Sold by meter, can easily but cut according to your needs.

Width : 15mm