.
List of products by brand Sethlans
.
.
Flat 2mm Dupont Dacron HI-VIZ line.
High visibility in cave and open water.
Low twist and very low stretch.
Sold per meter
High visibility flat polyester line.
Slightly negative, and very low twist and stretch
High visibility in the sea as well as underwater.
Flat 2mm Dupont Dacron HI-VIZ line.
High visibility in cave and open water.
Low twist and very low stretch.
Sold per meter
Excellent tool for regulator adjusting.
In one step you can adjust medium pressure from 1.stage and fine adjust 2.stage.
All this with only one regulator hose connection.
Compatible with Apeks regulators and other compatible types (Aqualung, Scubatech e.g.)
This quick connector allows to quickly connect a low pressure hose.
Allows to connect a standard MP hose on a first stage with 1/2" outlet (Apeks, Mares, Poseidon...).
Adapter LP Male 1/2 "to female 3/8".
Allows to connect a 1/2" MP hose on a first stage with 3/8" outlet.
Adapter LP Male 3/8 "to female 1/2".
Allows to connect a standard HP hose on your 1st stage MP outlet.
Adapter LP Male 3/8" to female 7/16".
Allows to connect a standard MP hose on your 1st stage HP outlet.
Adapter LP Male 7/16 "to female 3/8".
This precision made tool is designed to split the first stage of a regulator and is adjustable between 35 mm and 50 mm to fit a variety of models.
Adjustable SM rigging set with plastic buckle
Contains :
- tank webbing with plastic buckle for S80/10L/12L
- boltsnap DIR SS 120x33
- boltsnap SS 90x19
- SS stop
- 2 rubberband
- 1m cord
Ideal for fast configuration and travelling
This quick connector allows to quickly connect a low pressure hose.
ARGON sticker in vinyl polymer mate permanent cold plasticized. Duration estimated on scuba tanks from 3 to 5 years.
Available in several size:
- XL : S80/10L/12L = 620mmx150mm
TRIMIX / OXYGEN / NITROX
- L : S40/5L/7L = 480mmx110mm
TRIMIX / OXYGEN / NITROX
- M : 2L/3L = 380mmx85mm
TRIMIX / OXYGEN / DILUENT
- S : Pony = 330mmx70mm
ARGON
Formats are intended to cover the circumference of the blocks, the surplus must be cut to not overlap and avoid peeling
They must be applied on a clean and degreased surface. For a perfect installation, slightly heat the sticker with a hair dryer to activate the polymerization of the glue and chase away the bubbles with a piece of flexible plastic type credit card.