.
List of products by supplier PROTEUSHOP
.
.
Handle bar 1st Stage
Allow to maintain 1st stage in the bench vise during servicing
High visibility flat polyester line.
Slightly negative, and very low twist and stretch
High visibility in the sea as well as underwater.
Hip ring to be placed on the belt, to attach the bottom carabiner of your sidemount / decompression / bailout tank
The offset makes the ring free under the buoy.
Intox o-ring spatule, to remove o-rings without damage.
Vertical and horizontal flat sides, 2,5mm
Intox o-ring spatule, to remove o-rings without damage, flat sides, 1,2mm
APEKS Long Hose Holder
The Apeks hose holder is used to hold the long hose when diving in a long hose configuration without the need for a canister light.
The hose holder fits any standard 2"/5cm strap and can be used with single or double tank configurations.
Made from a single piece of Delrin with a laser engraved Apeks logo, the hose holder is both stylish and durable.
DIR SPG for air use.
Size 52mm for good reading.
Heavy duty brass housing and mineral glass made it very resistant to any use.
Easy to read scale from 0 to 360b with black background, numbers and needle "glow in the dark".
Swivel included.
White DIR SPG for air use.
Size 63mm for better reading.
White DIR SPG for Oxygen use.
Large size 63mm for better reading.
White DIR SPG for Oxygen use.
Size 52mm for good reading.
DIR 52mm gauge with black background, phosphorescent digits and hands, for use with air.
PVD (physical vapor deposition) coating, also known as thin film coating, is a process in which a solid material is vaporised in a vacuum and deposited on the surface of a part.
NITROX sticker in vinyl polymer mate permanent cold plasticized. Duration estimated on scuba tanks from 3 to 5 years.
Available in several size:
- XL : S80/10L/12L = 620mmx150mm
TRIMIX / OXYGEN / NITROX
- L : S40/5L/7L = 480mmx110mm
TRIMIX / OXYGEN / NITROX
- M : 2L/3L = 380mmx85mm
TRIMIX / OXYGEN / DILUENT
- S : Pony = 330mmx70mm
ARGON
Formats are intended to cover the circumference of the blocks, the surplus must be cut to not overlap and avoid peeling
They must be applied on a clean and degreased surface. For a perfect installation, slightly heat the sticker with a hair dryer to activate the polymerization of the glue and chase away the bubbles with a piece of flexible plastic type credit card.
OXYGEN sticker in vinyl polymer mate permanent cold plasticized. Duration estimated on scuba tanks from 3 to 5 years.
Available in several size:
- XL : S80/10L/12L = 620mmx150mm
TRIMIX / OXYGEN / NITROX
- L : S40/5L/7L = 480mmx110mm
TRIMIX / OXYGEN / NITROX
- M : 2L/3L = 380mmx85mm
TRIMIX / OXYGEN / DILUENT
- S : Pony = 330mmx70mm
ARGON
Formats are intended to cover the circumference of the blocks, the surplus must be cut to not overlap and avoid peeling
They must be applied on a clean and degreased surface. For a perfect installation, slightly heat the sticker with a hair dryer to activate the polymerization of the glue and chase away the bubbles with a piece of flexible plastic type credit card.
Scuba multi tool, very small 8,5mm x 5,3mm with 15 functions to solve issue in any circumstances, even under water!
Scuba multi tool, very small 8,5mm x 5,3mm with 15 functions to solve issue in any circumstances, even under water!