.
List of products by supplier PROTEUSHOP
.
.
Flat 2mm Dupont Dacron HI-VIZ line.
High visibility in cave and open water.
Low twist and very low stretch.
Sold per meter
High visibility flat polyester line.
Slightly negative, and very low twist and stretch
High visibility in the sea as well as underwater.
Flat 2mm Dupont Dacron HI-VIZ line.
High visibility in cave and open water.
Low twist and very low stretch.
Sold per meter
2mm polyester Kevlar core line.
This thread does not float, it is not growing.
Ideal for cave diving!
Sold per meter
Excellent tool for regulator adjusting.
In one step you can adjust medium pressure from 1.stage and fine adjust 2.stage.
All this with only one regulator hose connection.
Compatible with Apeks regulators and other compatible types (Aqualung, Scubatech e.g.)
Tri-glide for 6mm / 1/4" bungee. Can be used independently (left and right side) or as one piece bungee.
Transparent shrink tubing from 3 to 12mm
Sold in 1m units
This precision made tool is designed to split the first stage of a regulator and is adjustable between 35 mm and 50 mm to fit a variety of models.
Adjustable SM rigging set with plastic buckle
Contains :
- tank webbing with plastic buckle for S80/10L/12L
- boltsnap DIR SS 120x33
- boltsnap SS 90x19
- SS stop
- 2 rubberband
- 1m cord
Ideal for fast configuration and travelling
COMPASS APEKS BUNGEE MOUNT
The Bungee Mount Compass is a wrist mounted compass with an elasticated strap that will hold securely in place even when your wetsuit or drysuit compresses at depth.
APEKS Tek Gauge
The APEKS TEK Gauge is a high quality chrome plated submersible pressure gauge (SPG) with a black face to reduce glare and preserve night vision in low light environments.
APEKS Long Hose Holder
The Apeks hose holder is used to hold the long hose when diving in a long hose configuration without the need for a canister light.
The hose holder fits any standard 2"/5cm strap and can be used with single or double tank configurations.
Made from a single piece of Delrin with a laser engraved Apeks logo, the hose holder is both stylish and durable.
ARGON sticker in vinyl polymer mate permanent cold plasticized. Duration estimated on scuba tanks from 3 to 5 years.
Available in several size:
- XL : S80/10L/12L = 620mmx150mm
TRIMIX / OXYGEN / NITROX
- L : S40/5L/7L = 480mmx110mm
TRIMIX / OXYGEN / NITROX
- M : 2L/3L = 380mmx85mm
TRIMIX / OXYGEN / DILUENT
- S : Pony = 330mmx70mm
ARGON
Formats are intended to cover the circumference of the blocks, the surplus must be cut to not overlap and avoid peeling
They must be applied on a clean and degreased surface. For a perfect installation, slightly heat the sticker with a hair dryer to activate the polymerization of the glue and chase away the bubbles with a piece of flexible plastic type credit card.
2 batteries rechargeable type 18650 USB-C, 3.500mAh, 3,7V.
316 stainless steel BIG GRIP carabiner.