.
Category: Equipment
.
.
Emergency pulley
The ULTRALEGERE is a simple nylon sheave that can be installed on a carabiner.
The protective seat is designed for CANYON CLUB and CANYON GUIDE harnesses. It is durable and interchangeable, and effectively protects the wetsuit and harness webbing from abrasion. Available in three colors, in order to personalize the equipment and easily differentiate groups.
PETZL ROLLCLIP A non-locking. Pulley-carabiner that facilitates installation of the rope when pulley is connected to the anchor
ROLLCLIP A is a pulley-carabiner with a gate opening on the pulley side that facilitates installation of the rope when the pulley is fixed to the anchor. It is available with an automatic TRIACT-LOCK locking system, or without a locking system. ROLLCLIP A may be used with a CAPTIV positioning bar to favor loading of the carabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.
PETZL ROLLCLIP A TRIACT-LOCK. Pulley-carabiner that facilitates installation of the rope when pulley is connected to the anchor
ROLLCLIP A is a pulley-carabiner with a gate opening on the pulley side that facilitates installation of the rope when the pulley is fixed to the anchor. It is available with an automatic TRIACT-LOCK locking system, or without a locking system. ROLLCLIP A may be used with a CAPTIV positioning bar to favor loading of the carabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.
PETZL ROLLCLIP Z SCREW-LOCK.
Pulley-carabiner that facilitates installation on anchors and devices
ROLLCLIP Z is a pulley-carabiner with a gate opening on the non-pulley side to facilitate installation on anchors and devices. It is available in two locking systems: automatic TRIACT-LOCK system or manual SCREW-LOCK system.
PETZL ROLLCLIP Z TRIACT-LOCK. Pulley-carabiner that facilitates installation on anchors and devices
ROLLCLIP Z is a pulley-carabiner with a gate opening on the non-pulley side to facilitate installation on anchors and devices. It is available in two locking systems: automatic TRIACT-LOCK system or manual SCREW-LOCK system.
Twin pulley with fixes side plates that allows easy maneuvering on ropes or cables.
Climbing Technology
Pulley with movable cheeks that allow the insertion of any connector.
Key Features:
built in anodized light alloy;
sheave assembled on ball bearings;
for use with ropes Ø ≤ 13 mm;
designed for recoveries and load deflections.
Climbing Technology
Pulley with movable cheeks that allow the insertion of any connector.
Key Features:
built in anodized light alloy;
sheave assembled on ball bearings;
for use with ropes Ø ≤ 13 mm;
designed for recoveries and load deflections.
Climbing Technology
Double pulley with movable cheeks that allows the insertion of three connectors in the upper eyelet and one in the lower one.
Main features:
built in anodized light alloy;
pulleys assembled on ball bearings;
has an additional attachment point for making recovery systems;
for use with ropes Ø ≤ 13 mm;
designed for recoveries and load deflections.
Double pulley for travel along ropes
The TANDEM is designed for smooth and efficient Tyrolean traverses on rope.
Efficient double pulley for travel along ropes
The TANDEM SPEED is the fastest of the carriage pulleys. It is specifically designed for lower-angle Tyroleans.
PETZL SPIN L1
Very high efficiency single pulley with swivel
Openable even when attached to the anchor, the SPIN L1 pulley is designed for maximum simplicity in setting up hauling or load deviation systems, and tyroleans. The large diameter sheave mounted on sealed ball bearings gives it excellent efficiency. The swivel facilitates handling, allowing the pulley to be oriented under load, and direct connection of carabiners, ropes or slings.
Figure of 8 chest-strap designed for speleological activities.
Nylon webbing with cam buckle, used for connecting shoulder straps and ventral rope clamp. It helps to keep the rope clamp in its proper position.
Velcro tab on shoulder strap for fixing excess webbing.
Side gear loop.
Torso designed for caving activities.
Nylon webbing with cam buckle for the shoulder straps and the belly connection of the rope collar. Helps keep the rope collar in its proper position.
Back strap for connection to harness.
Single size torso straps for caving.
The ventral blocker is held in place by a narrow, instantly adjustable strap.
Comfortable 38mm shoulder straps, each adjustable with a double loop.
Four webbing loops for attaching small caving equipment (spanner, etc.) or lanyards.
"Must be used with a sit-harness.
One size fits all torso straps for caving.
Comfortable 38mm braces, each adjustable with a double loop.
Two webbing loops and four sheathed gear loops for hanging small caving gear (spanners, etc.) or lanyards.
The ventral blocker is held in place by a narrow strap with instant adjustment.
Women will appreciate this mixed model more than the simple AVSP12 model, as it can be positioned higher.
NO PPE: Must be used with a caving sit-harness.
Bulletin number 12 of the Comité Départemental de Spéléologie du Lot (CDS46)
Shoulder straps for positioning a CROLL, with gear loops
The EXPLO shoulder straps allow the CROLL ventral ascender to remain correctly positioned, in order to optimize efficiency and comfort during rope ascents when caving. Each strap is equipped with two HMPE gear loops and two slots for carrying gear. The X-shaped construction ensures good positioning on the shoulders, and the chest strap allows precise adjustment of the tension on the ventral ascender.
Shoulder straps for positioning a CROLL
The TORSE shoulder straps allow the CROLL ventral ascender to remain correctly positioned, in order to optimize efficiency and comfort during rope ascents when caving. The buckles adjust quickly to ensure positioning on the harness. The simple and rugged construction makes the straps extremely durable.