Belay device for large diameter ropes

Designed for rope ascents, the CROLL L belay device is easy to use. The connection holes ensure an effective hold during ascents. Thanks to the large rope groove, it adapts perfectly to large diameter ropes, whether inflated or stiff, while limiting friction. It is compatible with ropes with a diameter between 8 and 13 mm.

Reinforced belay device for thin to medium ropes

Designed for rope ascents, the CROLL S belay device is light and easy to use. The connection holes ensure an effective hold during ascents. The stainless steel protection plate improves wear resistance by protecting the rope's friction zone. It is compatible with rope diameters from 8 to 11 mm.

Clark ETCHE SECURITE caving boots with 77% recycled rubber.

The pleasure of being well-shod. ETCHE Sécurité has given priority to resistance to mechanical stress and grip qualities for the models recommended for the practice of these sports. The ankles are protected against shocks and the natural rubber leaves enough flexibility to allow good progress. The boots and shoes are unlined on the inside for quick drying.

Sizes available from 36 to 50.

Made in France!
 

Canyoning and caving shoes MIC CANYON ETCHE SECURITE with 77% recycled rubber.

The pleasure of being well shod. ETCHE Sécurité has given priority to resistance to mechanical stress and grip qualities for the models recommended for these sports. The ankles are protected against shocks and the natural rubber leaves enough flexibility to allow good progress. The boots and shoes are unlined on the inside for quick drying.

Sizes available from 36 to 50.

Made in France!

Catch for PANTIN foot ascender, helps to keep the rope in the device during rope ascents.

Catch for PANTIN foot ascender, helps to keep the rope in the device during rope ascents.

Low strap that fits both left and right models of the CLIMBING TECHNOLOGY QUICK STEP-S footlockers

Top strap that fits both left and right models of the CLIMBING TECHNOLOGY QUICK STEP-S footlockers

40cm coated pvc caving gloves for effective protection. Large cuff, fitting well over the sleeves of the caving suit for better protection.

Climbing Technology

Light alloy descender for single ropes.

Main features:

ideal for use in caving;
equipped with a clicker that allows the rope to be introduced without releasing the carabiner from the harness;
allows the speed of descent to be adjusted by holding or sliding the free end of the rope;
the hole on the lower flange allows the quickdraw carabiner to be placed directly on the descender;
spare pulley available 

Brake bar descender for long descents

RACK is an easy-to-use caving descender. It can be used with 9 to 13 mm diameter low stretch kernmantle ropes (on one rope strand) or with 8 to 11 mm low stretch kernmantle ropes (on two strands) to facilitate long descents over 80 meters. The brake bars are replaceable to prolong its useful lifetime.

Simple, lightweight descender for caving

SIMPLE, as its name implies, is an easy-to-use caving descender. It can be used with 8.5 to 11 mm diameter low stretch kernmantle ropes. Reduced bulk and low weight simplify progression in narrow passages. The pulleys can be rotated or replaced to prolong the duration of use over time.

Assisted braking descender for caving

Descend with assisted braking for your cave explorations! STOP is a caving descender with assisted braking that can be used with 8.5 to 11 mm diameter low stretch kernmantle ropes It provides better control over the descent and makes maneuvers on the rope easier. The ergonomic handle makes the grip and overall use especially comfortable. Stainless steel friction zones make it a durable tool for all your excursions!

PETZL JAG TRAXION. High-efficiency double progress capture pulley

The JAG TRAXION double progress capture pulley is designed for use with the JAG pulley to make a 4:1 haul system. Sheaves mounted on sealed ball bearings for excellent efficiency.

PETZL JAG. High-efficiency double pulley

The JAG double pulley is designed for use with the JAG TRAXION double progress capture pulley to make a 4:1 haul system. Sheaves mounted on sealed ball bearings for excellent efficiency.

PETZL TWIN. High strength, very high efficiency double Prusik pulley

TWIN is a high-strength double pulley designed for rescue professionals. It is designed to set up progress capture systems of high mechanical advantage.

PETZL SPIN L2. Very high efficiency double pulley with swivel

Openable even when attached to the anchor, the SPIN L2 is a double pulley designed for maximum simplicity when setting up hauling systems or tyroleans. The two parallel-mounted sheaves and auxiliary attachment point allow the pulley to be used for setting up various types of complex haul systems The large diameter sheaves mounted on sealed ball bearings provide excellent efficiency The swivel facilitates handling, allowing the pulley to be oriented under load, and direct connection of carabiners, ropes or slings.

The MTDE "Siam" pedal: 2 small loops allow to insert both feet in separate support

Weight: 40 g.

Light pedal made of Dyneema fine cord with buttonhole for the foot made of reinforced ribbon.

Made of Dyneema®, a product known for its flexibility and high strength, this climbing pedal will be appreciated for its ease of use.

The MTDE "Trasion" pedal: 1 small loop allows the passage of one foot only. 

Weight: 30 g.

Made from Warmtex the most abrasion resistant material available for neoprene knee and elbow pads.

Warmtex was developed and is only manufactured by Warmbac

The equipment holder for the CANYON CLUB harness provides additional racking options, making it easy for the guide to stow the carabiners of the DUAL CANYON CLUB lanyard. It connects to the waistbelt webbing of the harness.