Inflator Male Nipple Standard 3/8-24 UNF

SITECH latex wrist seal with bottleneck shape and standard sleeve circumference.

Neoprene mask strap Lot Filling Station

To check low pressure on your first stage. Power inflator connector

Manifold 9/16 Female to 2x 3/8 Female

Manifold block compact 3 way 9/16 female to 3x 3/8 Female

High quality low pressure manifold for pressure distribution from a medium pressure source to multiple devices.

Mini manometer. Perfect for pony

Color could change with deliveries

Pocket slate for deco plan and underwater notes. 

Mainly used to take your run time with you. 

Think about using our DecoDecal stickers and fine permanent marker, this is pretty awesome and could be re used many times! 

Size : 150x130mm 

Quick disconnect 9/16" male to 3/8" male with check valve

Quick disconnect 9/16" male to 3/8" male with check valve

Quick disconnect 9/16" male to 9/16" male

Quick disconnect 9/16" male to 3/8" male with check valve

Quick disconnect BC male nipple to 3/8" female with check valve

Quick disconnect BC male nipple to 3/8" male

Quick disconnect BC male nipple to 3/8" male with check valve

Could be used upside down according to gear you want to dry/suspend

Schrader valve screwdriver.

Screwdriver for tank valve

This stop flow is positioned just before the second stage on a regulator, or just before the ADV on a rebreather.

This stop flow is positioned just before the inflator for your drysuit or your wing/BCD. 

This valve allows to cut the gas supply in case of continuous flow. 

It is mandatory to add an over-pressure valve (see accessories) on the 1st stage to avoid a burst hose if 2nd stage is not setup.

Valve port intended to be glued or welded on the inside of a drysuit.

Allows to fix/remove the valves so tech easily without damaging them.

Black silicon mouthpiece