0 Item

Shopping cart(0)

There are no more items in your cart
Included taxes €0.00
Total (tax incl.) €0.00
Oxygen sensor SMB / COAX VANDAGRAPH 08-2023

Scroll mouse to zoom in or zoom out

  • Oxygen sensor SMB / COAX VANDAGRAPH 08-2023

Oxygen sensor SMB / COAX VANDAGRAPH 08-2023

€41.30 tax incl. ( 41,3 € tax excl. ) €59.00
Last items in stock

SMB / COAX Oxygen sensor VANDAGRAPH / NARKED@90.

Oxygen sensor for rebreathers with gold plated SMB/ COAX  connection for rebreathers T-REB, Inspiration, Evolution, XCCR et Flex.

Vandagraph produces the most reliable OEM sensors on the market for many rebreather and analyzer manufacturers





Suitable for rebreathers 

  • - T-REB,
  • - Inspiration, 
  • - Evolution, 
  • - XCCR, 
  • - Flex.
  • Replaces the following sensors references :

  • - APD16,
  • - AII PSR-11-39-SMB

As recomended by AP Diving : reduce your GF High by 5 points

"Accuracy of cells
While the Narked @ 90 cell and the APD16 cell are very stable they have an unfortunate trait in that once the Inspiration scrubber warms up from top to bottom, which is 15 to 20 mins after the start of the dive, the cells read 0.05 bar higher than the actual PO2
i.e. while the cells display 1.30 bar ( the setpoint) – the actual PO2, measured on a calibrated fast response external analyser, is in fact 1.25 bar.
Although undesirable, this trait is repeatable and reliable and so is easily compensated for.. simply by reducing the High Gradient factor slightly.

Typically reducing the GF High by 5 is sufficient: If you use 90 normally – use 85; if you use 85 normally – use 80 etc.".


Oxygen sensors are chemical products with a limited life. They are consumables like batteries, their lifespan can vary considerably depending on their use, exposure to oxygen and environmental factors (heat, cold, humidity, duration of exposure to oxygen in greater or lesser percentages...). 

Sensors are one of the few products on our site that cannot be returned. 


Specific References

#htmlcaption1 #htmlcaption2 #htmlcaption3