Key features:

• - SPOT lighting electronics with 1 LED at 5°,
• - LARGE lighting electronics with 4 LEDs: 2 at 125°, 1 at 60° and 1 at 45°,
• - Maximum output of 2400 lumens (2x 1200 lumens),
• - Maximum operating time 13 days,
• - Waterproof to 150m,
• - 13 power levels and settings,
• - Travel mode,
• - Weight 370 grams with battery,
• - Weight 230 grams without battery,
• - Can be used with two 21700 batteries or two 18650 batteries, also works with a single battery.

Two buttons for easy use of the 13 different settings and 3 modes:

• - Diffuse beam,
• - 5° narrow beam,
• - Combined diffuse and narrow beam.

Switch on, change intensity and switch off by pressing briefly:

• - To switch on, press button 1 (top) 3 times in quick succession. The lamp will come on at minimum intensity on the wide beam.
• - Press button 1 (up) briefly to increase the intensity,
• - Press button 2 (down) briefly to reduce the intensity.
• - To switch off, the light level must be set to the minimum wide beam intensity and, after waiting a few seconds, press button 2 (down) twice quickly.

To change modes, press and hold either the narrow beam or the wide beam, or both:

• - Once on the wide beam, a long press on button 1 (top) switches on the narrow beam at the same time as the wide beam; to return, long press button 1 (top),
• - Once on the wide beam, press and hold button 2 (down) to switch on the narrow beam without the wide beam. To return, press and hold button 1 (up).

Batteries: 

• - Batteries must be positioned with the positive pole at the top (see indications on the canister), the gasket for sealing is also important, especially for divers: always keep the gasket clean and (lightly) greased for optimum sealing,
• - Tighten the battery cover on the canister to compress the springs as much as possible, so that you can turn the screws without damaging the inserts, 
• - To check the battery level in any mode, the lamp must be switched on, long press the two buttons simultaneously, the main LED will flash from 1 to 5 times depending on the battery charge, 5 being the maximum charge level.

Uses:

• - For diving, you can use the Argolamp either on the helmet or on the hand support (3D printed) supplied in the pack, it can also be positioned on a scooter (use of a spacer required due to the cable gland),
• - On the helmet: either fixed using the action camera support (GoPro type), or using the elastic headband supplied (avoids making holes in the helmet for the support),
• - On the head using the elastic headband supplied,
• - Shooting: The Argolamp can be mounted on a tripod using the M8 thread on the underside of the canister (standard for mounting cameras) or using the action camera support (GoPro type), for superb shots with no moving shadows.
• - A second action camera mount (GoPro type) is supplied and can be attached to the Argolamp head.

Supplied with:

• - Helmet mount (GoPro type for the head and rilsan for the battery),
• - Elastic head support for temporary use,
• - Hand support, by attaching the head to the battery, the unit can be worn on the back of the hand,
• - Spare battery gasket,
• - Adapter for 18650 battery,
• - GoPro-type action camera holder for mounting on the head of the lamp,
• - USB charger, 
• - 2x 21700 batteries (batteries are not shipped by air)

Lamp sold on its own, without the helmet you'll find on our pages:

https://proteushop.com/en/37905-helmets