Carabiner with friction spur for descenders

The FREINO is ideal for adding or adjusting friction during the descent.

Automatic locking carabiner with friction spur for STOP and SIMPLE descenders

FREINO Z is an automatic locking carabiner with friction spur, designed for STOP (D009AA00) and SIMPLE (D004AA00) caving descenders. It allows the user to increase or control the braking action of the descent. It facilitates creation of a tie-off. FREINO Z can be rotated in order to make the descender loss-proof when transferred from gear loop to semi-circular carabiner.

Automatic locking carabiner with friction spur for STOP and SIMPLE descenders

FREINO Z is an automatic locking carabiner with friction spur, designed for STOP (D009AA00) and SIMPLE (D004AA00) caving descenders. It allows the user to increase or control the braking action of the descent. It facilitates creation of a tie-off. FREINO Z can be rotated in order to make the descender loss-proof when transferred from gear loop to semi-circular carabiner.

A snapgate carabiner in AISI 304 stainless steel, used in combination with caving descenders (pulley or figure of 8) on a single rope.

The most important feature of this patented carabiner is that it allows the user to vary the descent simply by moving the rope into the narrow section of the carabiner, eliminating almost all downwards force.

In addition the carabiner is equipped with a stainless steel twisted ring which can be clipped into the semi-circular maillon on the harness.

This ring makes this carabiner suitable for all descent speeds on any type of rope.

It is small and light and does not exert any damage on the rope.

Hot-forged light alloy tube-shaped belay / rappel device, equipped with V-shaped braking grooves for greater braking ability.

For use with single rope, half ropes and twin ropes.

Climbing Technology

Classic figure of eight descender, ideal for belaying the leader in a dynamic way and for abseiling.

Main features:

• made of hot forged light allow;
• it enables a quick and easy installation for descents.

Hot-forged light alloy 8-shaped belay / rappel device.
For use with single rope, half ropes and twin ropes.
The squared shape reduces rope twisting and the curved profile allows two different descent speeds.

Climbing Technology

Hot forged light alloy figure 8 belay / rappel device.
It can be used with single, half and twin ropes.

Climbing Technology

Hot forged light alloy figure 8 belay / rappel device.
It can be used with single, half and twin ropes.

Climbing Technology

Light alloy descender for single ropes.

Main features:

ideal for use in caving;
equipped with a clicker that allows the rope to be introduced without releasing the carabiner from the harness;
allows the speed of descent to be adjusted by holding or sliding the free end of the rope;
the hole on the lower flange allows the quickdraw carabiner to be placed directly on the descender;
spare pulley available 

Brake bar descender for long descents

RACK is an easy-to-use caving descender. It can be used with 9 to 13 mm diameter low stretch kernmantle ropes (on one rope strand) or with 8 to 11 mm low stretch kernmantle ropes (on two strands) to facilitate long descents over 80 meters. The brake bars are replaceable to prolong its useful lifetime.

Simple, lightweight descender for caving

SIMPLE, as its name implies, is an easy-to-use caving descender. It can be used with 8.5 to 11 mm diameter low stretch kernmantle ropes. Reduced bulk and low weight simplify progression in narrow passages. The pulleys can be rotated or replaced to prolong the duration of use over time.

Assisted braking descender for caving

Descend with assisted braking for your cave explorations! STOP is a caving descender with assisted braking that can be used with 8.5 to 11 mm diameter low stretch kernmantle ropes It provides better control over the descent and makes maneuvers on the rope easier. The ergonomic handle makes the grip and overall use especially comfortable. Stainless steel friction zones make it a durable tool for all your excursions!

PETZL MAESTRO® S .Descender with integrated progress-capture pulley for loads up to 250 kg, compatible with 10.5 to 11.5 mm ropes

MAESTRO S is a descender designed for technical rescue operations. It facilitates manipulation of heavy loads, for lowering or hauling, and may be used in both the primary system or in a back-up belay. This versatility allows rescuers to adapt to any situation they may encounter on the rescue scene. The ergonomic handle and integrated brake allow for comfortably controlled descent. Shifting from lowering position to hauling position is immediate, without the need to transfer the load. The integrated progress-capture pulley has a large diameter sheave mounted on sealed ball bearings, ensuring excellent hauling efficiency. The AUTO-LOCK system automatically locks the rope when the handle is not in use. Once locked, the rope can be taken up without having to manipulate the handle. The MAESTRO S descender is compatible with 10.5 to 11.5 mm ropes and allows handling of loads up to 250 kg.

A multipurpose rappel/belay device made from a hot forged light allow. It has two holes, ideal for positioning the anchor, for attaching the lanyard for abseiling, rope manoeuvres and various rescue operations.

Pulley for SIMPLE caving descender

The replacement pulley prolongs the lifespan of the SIMPLE descender. It is compatible with the upper and lower pulleys of the SIMPLE (D004AA00) descender, and only with the lower pulley of the SIMPLE (D04) descender.

Self-braking descender with anti-panic function for work at height and rope access work

The self-braking I’D S descender is primarily designed for work at height and rope access work. It has an ergonomic handle that allows comfortable descent control. The integrated anti-panic function and anti-error catch limit the risk of an accident due to user error. The AUTO-LOCK system allows users to easily position themselves at a workstation without having to manipulate the handle or tie off the device. Once locked, the rope can be taken up without having to manipulate the handle. The safety gate allows the rope to be installed with the device remaining connected to the harness. I’D S is compatible with 10 to 11.5 mm ropes and allows handling of loads up to 250 kg.